Table of Contents Table of Contents 1. Before You Begin ....................1 What Is Included ......................... 1 Unpacking Instructions ......................1 Claims ............................1 Typographic Conventions ....................1 Icon Indications ........................1 Product at a Glance ......................2 Safety Notes ........................2 Personal Safety ...........................
Page 4
Table of Contents Auto/Custom ..........................15 Dimmer Speed ........................... 15 Zoom Selection .......................... 15 Zoom Reset ..........................15 Menu Map ......................... 16 DMX Values ........................18 TOUR ............................18 TOUR (cont.) ..........................19 ARC1 ............................19 AR1.D ............................19 ARC.2 ............................19 AR2.D ............................
CHAUVET®. Failure to notify the carrier in a timely manner may invalidate your claim. In addition, keep the container and all the packing material for inspection.
There are no user-serviceable parts in this product. Any reference to servicing in this User Manual applies only to properly certified CHAUVET® technicians. Do not open the housing or attempt any repairs unless you are certified by CHAUVET®. Please refer to all applicable local codes and regulations for proper installation of this product.
Introduction 2. Introduction Product The COLORado™ 2 Zoom Tour is an RGBW LED wash product with color mixing and zoom control. This product consists of a single module that houses the internal power Description supply, the control panel, the LED drivers, the LED boards, and motorized moving lenses, as well as the power and signal connectors.
The listed current rating indicates the maximum current draw during normal operation. For more information, download the document Sizing Circuit Breakers from the CHAUVET® website: www.chauvetpro.com. Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0% to 100% switch.
Setup DMX Linking You can link the COLORado™ 2 Zoom Tour to a DMX controller using a standard DMX serial connection. If using other DMX compatible products with the COLORado™ 2 Zoom Tour, you can control each one individually with a single DMX controller. DMX Modes The COLORado™...
Rigging The COLORado™ 2 Zoom Tour consists of consists of a double-bracketed yoke and the body of the fixture. CHAUVET® recommends using the following general guidelines when mounting this product: · When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
Operation 4. Operation Control Panel Button Function Description Exits from the current menu or function <MENU> Enables the currently displayed menu or <ENTER> sets the currently selected value in to the current function Navigates upward through the menu list and <UP>...
Operation DMX Control In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison. 1. Select a DMX personality as shown in Personality. 2. Set the running mode: a.
Operation Static Color The Static Color mode allows for permanent RGBW color mixing without a DMX controller. 1. Go to the STAT main level. 2. Select the desired color, zoom, and strobe values on the programming level. For example, R.255, G.210, B.230, W.200, Z.255, S.15. The strobe values are 0~20. Auto Programs Auto programs allow for dynamic RGBW color mixing without a DMX controller.
Operation Color Settings The COLOR setting determines how the COLORado™ 2 Zoom Tour generates the white color based on various RGB settings. 1. Go to the SET main level. 2. Select COLR. 3. Select OFF, RGBW, or UC. OFF: When all the RGB faders are set to 255, the output is maximum, although the resulting white color may not be balanced.
· Green indicates that the upload process completed successfully. · Red indicates that the upload process failed due to an error. Recheck all cable connections and restart the process. If the issue persists, contact CHAUVET® Technical Support. DO NOT upload the data from a COLORado™ 2 Zoom Tour to a different product.
Operation Reset This setting allows you to reset the COLORado™ 2 Zoom Tour to the default values, including the custom programs. 1. Go to the SET main level. 2. Select REST. 3. When PASS shows, press <ENTER>. 4. Enter the master access password as described in Control Panel Lock.
Operation TOUR Notes These notes clarify the way the TOUR DMX personality works. · Channel 1 controls the intensity of the currently projected color. Master Dimmer · When the slider is at the highest position (100%), the intensity of the output is at maximum.
Operation Menu Map Main Level Programming Levels Description User can combine Red, Green, Blue and White 000~255 to generate a custom (0~100%) color STAT Changes the beam angle 00~20 Select a strobe STRB (0~20 Hz) frequency (0~20 Hz) Choose from 10 AT.
Page 21
Operation Main Level Programming Levels Description UPLD Enter password Defaults product REST Enter password Defaults product No dimmer DIM1~4 Dimmer curve All LED’s turn off when BLAC DMX signal is lost All LED’s stay on the DERR last command used SAVE when the DMX signal is lost...
Operation DMX Values TOUR Channel Function Value Percent/Setting 000 ó 255 0~100% Dimmer 0~100% 000 ó 255 Step Time When CUS. 01-10 in CH. 8 is activated Green 0~100% 000 ó 255 Step Time When CUS. 01-10 in CH. 8 is activated 000 ó...
Operation TOUR Channel Function Value Percent/Setting (cont.) 000 ó 255 Only when CH. 8 is Auto 041~139 is activated Auto Speed 000 ó 009 Preset dimmer speed from control panel 010 ó 029 Linear dimmer 030 ó 069 Nonlinear dimming curve 1 (fastest) Dimmer Speed 070 ó...
Technical Information 5. Technical Information Product To maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning Maintenance frequency. As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating.
Faulty Display/Main/DMX interface board Send product for repair If you still experience technical problems after trying the above solutions or if you need to send the product for repair, contact CHAUVET® Technical Support. COLORado™ 2 Zoom Tour User Manual Rev. 01 -21-...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. Proper FedEx packing or double-boxing are the packaging methods CHAUVET® recommends. CHAUVET® reserves the right to use its own discretion to repair or replace returned product(s). Contact Us World Headquarters United Kingdom &...
Technical Information Technical Specifications Dimensions and Length Width Height Weight Weight 9.3 in (237 mm) 11.9 in (302 mm) 14.1 in (358 mm) 18.5 lbs (8.39 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Supply Type Range Voltage Selection Electrical...