Mounting; Orientation; Rigging - Chauvet COLORado Batten 72 Tour User Manual

Setup

Mounting

Orientation

Rigging

Procedure
Product Mounting
Diagram
bcLORado™ Batten 72 Tour User Manual Rev. 01c
Read the safety notes at the beginning of this guide and follow their recommendations
before mounting this product.
Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation.
Make sure to mount this fixture away from any flammable material as indicated in the
Safety Notes.
CHAUVET® recommends following the general guidelines below when mounting the
COLORado™ Batten 72 Tour.
·
When selecting an installation location, consider ease of access to the product for
operation, programming adjustments and routine maintenance.
·
Always mount this product making sure that there is adequate room around it for
ventilation.
·
Do not expose this product to extreme temperature changes, rain or humidity.
·
If mounting this fixture overhead, make sure that the location where you are
mounting it can support its weight. Please see the Technical Specifications section
of this guide for the weight requirement of this product.
The COLORado™ Batten 72 Tour comes with two adjustable feet that double as
hanging bracket to which you can attach "C" or "O" clamps. These feet also serve as
floor or wall mount supports. You must supply your own "C" or "O" clamps and make
sure that they are capable of supporting the weight of this fixture. You will have to use
two mounting points per fixture.
Clamp
Safety
(Not
provided)
(Included)
Overhead Mounting
Floor Mounting
-8-
Clamp
Cable
provided
(Not
)
March 3, 2010