Therefore, if the received merchandise appears to have damages caused during shipping, the customer must submit the damage report and any related claims with the carrier, not CHAUVET®. The customer must submit the report upon reception of the damaged merchandise. Failure to do so in a timely manner may invalidate the customer’s claim with the carrier.
Do not use as a space heater. FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your Hurricane™ 700. Make sure you use FCQ regularly to increase the life of your fogger. Page 4 of 12 ...
Using a flat head screwdriver, remove the fuseholder from the IEC housing. Remove the bad fuse from the fuseholder. Insert the new fuse into the fuseholder. Install the fuseholder in the IEC housing. Page 6 of 12 Hurricane™ 700 User Manual (Rev. 08)
Mounting Orientation The Hurricane™ 700 may be mounted in any position, provided there is adequate room for ventilation around it. Rigging Be sure that the structure or surface on which you are mounting this product can support its weight and operating temperature. Please see the “Technical Specifications”...
4. O PERATION Using the Wired Remote Trigger the Hurricane™ 700 by using the included wired remote. This remote has an LED indicator, which is used to indicate when the fogger has reached the required operating temperature. The button on the remote is momentary.
Do not operate the machine without liquid at any time. FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your Hurricane™ 700. Make sure you use FCQ regularly to increase the life of your fogger. Storage When storing run distilled water (not tap water) through the system as described in the cleaning regimen above.
Blown fuse Internal problem Hurricane™ 700 User Manual (Rev. 08) Possible Action Make sure that the total load does not exceed 80% of the breaker or fuse nominal current Check the power lines and power cords...
The user must clearly label the package with a Return Merchandise Authorization Number (RMA #). CHAUVET® will refuse any product returned without an RMA #. DO NOT write the RMA # directly on the box. Instead, write it on a properly affixed label.