Snmp Settings - EnGenius M2000 User Manual

EnGenius M2000 Version 1.0
6.5.2 SNMP Settings
This option allows you to assign the contact details, location, and community name and trap
settings for SNMP. This is a networking management protocol used to monitor network‐
attached devices. SNMP allows messages (called protocol data units) to be sent to various
parts of a network. Upon receiving these messages, SNMP‐compatible devices (called agents)
return data stored in their Management Information Bases. .
SNMP Enable/Disable: Choose to enable or disable the SNMP feature.
Contact: Specify the contact details of the device.
Location: Specify the location of the device.
Read‐Only Community Name: Specify the password for access the SNMP community for
read only access.
Read‐Write Community Name: Specify the password for access to the SNMP community
with read/write access.
Trap Destination IP Address: Specify the IP address of the computer that will receive the
SNMP traps.
Trap Destination Community Name: Specify the password for the SNMP trap community.
Click on the Apply button to save the changes.
62