Mesh Operating Mode; Logging I N - EnGenius M2000 User Manual

EnGenius M2000
8 Mesh Operating Mode
8.1 Logging In
To configure the device through the web‐browser, enter the IP address of the device
(default: 192.168.1.1) into the address bar of the web‐browser and press Enter.
Make sure that the device and your computers are configured on the same subnet. Refer to
Chapter 2 in order to configure the IP address of your computer.
After connecting to the IP address, the web‐browser
will display the login page.
Specify admin for both the user name and password.
After logging in you will graphical user interface (GUI) of
the device. The navigation drop‐down menu on left is
divided into four sections:
6. Status: Displays the overall status, Wireless client list
and system log.
7. System: This menu includes the system properties.
8. Wireless: This menu includes wireless network, security and advanced settings.
Management: This menu includes the admin setup, SNMP settings, firmware upgrade,
9.
save/restore backup, time setting and diagnostics.
Version 1.0
88