EnGenius M2000 User Manual page 11

EnGenius M2000
2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow you to
configure the TCP/IP settings of your PC/Notebook.
3. Select Use the following IP Address radio button and then enter the IP address and subnet mask.
Ensure that the IP address and subnet mask are on the same subnet as the device.
For Example:
4. Click on the OK button to close this window, and once again to close LAN properties window.
PC IP address: 192.168.1.10
PC subnet mask: 255.255.255.0
Version 1.0
11