Lan Settings; Vpn Pass Through - EnGenius M2000 User Manual

EnGenius M2000
7.4.2 LAN Settings
This page allows you to configure the LAN interface as IP address, IP subnet mask and WINS
server IP. When you enable 'Use Router As DHCP Server', specify the IP address from
starting to ending.
7.4.3 VPN Pass Through
This page allows you to enable the pass through feature.
PPTP Pass Through: Place a check in this box if you would like to enable this pass through.
PPTP is a protocol (set of communication rules) that allows corporations to extend their own
corporate network through private "tunnels"
L2TP Pass Through: Place a check in this box if you would like to enable this pass through.
Layer 2 Tunneling Protocol is a transport protocol that enables tunneling through the
Internet for the establishment of virtual private networks.
IPSec Pass Through: Place a check in this box if you would like to enable this pass through.
IPSec is a VPN protocol used to implement secure exchange of packets at the IP layer.
Click on the Apply button to save the changes.
Version 1.0
77