Table of Contents
Advertisement
EnGenius M2000
8.5.5 Firmware Upgrade
This page is used to upgrade the firmware on the device. Make sure that downloaded the
appropriate firmware from your vendor.
Click on the Browse button and then select the appropriate firmware and then click on the
Upgrade button.
Note: The upgrade process may take about 1 minute to complete. Do not power off the
device during this process as it may crash the device and make it unusable. The device will
restart automatically once the upgrade is complete.
8.5.6 Time Settings
Click on the Time Settings link under the Management menu. This page allows you to
configure the time on the device. You may do this manually or by connecting to a NTP server.
Manually Set Date and Time: Specify the date and time
Automatically Get Date and Time: Select the time zone from the drop down list and then
specify the IP address of the NTP server.
Click on the Apply button to save the changes.
Version 1.0
104
Hide quick links:
Advertisement
Table of Contents
