Wireless; Wireless Network - EnGenius M2000 User Manual

EnGenius M2000
7.5 Wireless
7.5.1 Wireless Network
The Wireless Network page allows you to configure the wireless mode, channel, SSID, and
security settings.
Wireless Mode: Depending on the type of wireless clients that are connected to the
network, you may select B, G, B/G‐mixed or Super‐G. If you are not sure about which clients
will be accessing the wireless networks, it is recommended that you select B/G‐mixed for
the best performance.
SSID: The SSID is a unique named shared amongst all the points of the wireless network. The
SSID must be identical on all points of the wireless network and cannot exceed 32 characters.
You may specify an SSID or select one from the Site Survey.
Site Survey: Click on the Site Survey button in order to scan the 2.4GHz frequency for
devices that broadcast their SSID. Click on the BSSID link to connect to the Access Point.
Click on the Refresh button to re‐scan the frequency.
Under the Wireless section of the left menu, you will
see the following options: Wireless Network, Wireless
Security, and Wireless Advanced Settings. Each
option is described below.
Version 1.0
78