Access Point Operating Mode; Logging I N - EnGenius M2000 User Manual

EnGenius M2000
4 Access Point Operating Mode
4.1 Logging In
To configure the device through the web‐browser, enter the IP address of the device (default:
192.168.1.1) into the address bar of the web‐browser and press Enter.
Make sure that the device and your computers are configured on the same subnet. Refer to
Chapter 2 in order to configure the IP address of your computer.
After connecting to the IP address, the web‐
browser will display the login page.
Specify admin for both the user name and
password (Default settings)
After logging in you will graphical user interface
(GUI) of the device. The navigation drop‐down
menu on left is divided into four sections:
1. Status: Displays the overall status, connection
status, and event log.
2. System: This menu includes the system
properties, IP and Spanning Tree settings.
3. Wireless: This menu includes network setting, MAC filter, WDS link, advanced, and security.
4. Management: This menu includes the admin setup, SNMP, firmware upgrade, diagnostics, time
setting and save/restore backup.
Version 1.0
13