Mounting Kits; Ip Address Configuration - EnGenius M2000 User Manual

EnGenius M2000 Version 1.0
2.3 Mounting Kits
The images below depict the standard mounting kits.
Pole Mount Wall Mount Window Mount
2.4 IP Address Configuration
This device can be configured as a Access Point / Client Bridge / WDS Bridge / Client Router / MESH.
The default IP address of the device is 192.168.1.1. And in order to log into this device, you must first
configure the TCP/IP settings of your PC/Notebook.
1. In the control panel, double click Network Connections and then double click on the connection
of your Network Interface Card (NIC). You will then see the following screen.
10