Your Receiver; Pin-Code Default: 0000; Front Panel; Rear Panel - Strong SRT 5203 User Manual

PART 1 • English

2.0 YOUR RECEIVER

2.1 PIN-CODE DEFAULT: 0000

2.2 Front Panel

2.3 Rear Panel

1. ANT IN
2. TO TV
3. S/PDIF Coaxial
4. USB
5. TV SCART To connect your receiver with your TV set using a SCART cable.
6. VCR SCART To connect to a Video or DVD recorder

2.4 Remote Control

1.
2.
3. PG+/PG-
4. DTV/VCR
5. INFO
6. VOL+/VOL- Volume up/down
7. MENU
8. EXIT
9. pq
10. tu
11. OK
12. RECORD
13. TIMESHIFT Activates the timeshift function
14. 0 ~ 9
15. EPG
16. RECALL
17. AUDIO
18. TV/RADIO Toggles between TV or RADIO mode
19. FAV
20. FILE
To connect an antenna for reception of broadcasting signal.
To connect a TV set or to connect an extra receiver.
To connect your receiver to digital audio amplifier.
To connect an USB device
Turns the receiver On/Standby
Mutes audio output of the receiver
Page up/down
To switch between TV and VCR mode
Shows the actual channel information
Opens the main menu/In menu you will get one step back
Exits from the menu or sub-menu
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
Menu On: Activates the highlighted menu item.
Menu Off: Displays the current channel list
Records the TV program to the connected storage device
Channel selection or value input
Shows the EPG (Electronic Program Guide) in TV mode
Back to previous shown channel
Sets the current audio channel to left, right or stereo
Favourite group selection
Shows the record list (preconditioned file/s already recorded)
Fig. 1
Fig. 2
Fig. 3
5