Strong SRT 5203 User Manual page 16

PART 1 • English
2. Press pq to select a desired recording and press OK or BLUE (u)
button to playback the desired files.
3. Press EXIT to exit.
During the playback, it is possible to perform the following actions:
YELLOW (2):
6
GREEN ("):
5.5.3 Removable Disk Information
In this menu you can display information about the storage device.
1. In "Media+" menu, select "Removable Disk Information" and press OK to
enter this menu.
2. Press EXIT to exit.
5.5.4 Record Settings
This menu allows you to set the time for Timeshift, define Record Type, set Standby Mode
and Record Recovery.
1. In "Media+" menu, select Record Settings and press OK to enter this menu.
2. Press pq to select a desired item and use tu to change settings.
3. Press EXIT to exit.
Timeshift Time(min): 10/20/30/40/50/60
Record Type:
Standby Mode:
Record Recovery:
5.5.4.1 Time shift and recording functions
Please connect your USB device to the foreseen port of your receiver. Wait a few
seconds after the sign for connected device is shown on screen, then you are ready to
start Time shift or to record a broadcasted programme.
Time shift
Time shift function allows you to watch a programme in time shifted mode.
Press TIMESHIFT in viewing mode. Then you can use tu to move the cursor to the
desired time which you want to watch, afterwards press OK to confirm. In case the info
banner is not shown you just need to press the INFO button to call it up/show it again.
Time shift and Record
To perform this action you have to press 4 and afterwards the YELLOW (2) button.
to pause the playback.
for fast forward or fast rewind during playback
press once to perform slow motion, every further press will change
the slow motion speed (1/2, 1⁄4, 1/8).
TS/PS
ON/ OFF
ON/ OFF
13