Card Reader - HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual

Card Reader

Description
Card reader
The card reader is secured to the front right corner of the chassis.
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the front bezel
4. Remove the optical drive
5. Remove the hard drive
6. Remove the optical drive rail
7. Disconnect the cable from the system board connector labeled MEDIA.
8. On the outside of the chassis, remove the one Torx screw that secures the card reader to the
chassis.
Figure 9-22
228 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
(Front Bezel on page
(Removing the Optical Drive on page
(Hard Drive on page
(Optical Drive Rail on page
Removing the card reader screw
(Preparation for Disassembly on page
(Access Panel on page
209).
222).
227).
Spare part number
592685-001
207).
208).
219).