Table of Contents
Advertisement
8.
Carefully lift the processor from the socket (3).
CAUTION:
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor's solder connections.
Figure 8-36
To install a new processor:
1.
Place the processor in its socket and close the retainer. Make sure the slot in the processor fits
into the post on the socket.
200 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Do NOT handle the pins in the processor socket. These pins are very fragile and
Removing the processor
Hide quick links:
Advertisement
Table of Contents
