Access Panel - HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual

Access Panel

Description
Access panel
To access internal components, you must remove the access panel:
1. Prepare the computer for disassembly
2. If the computer is on a stand, remove the computer from the stand and lay the computer down.
3. Loosen the thumbscrew on the rear of the computer (1), slide the access panel toward the rear
of the computer, then lift it off (2).
Figure 9-1
To install the access panel, reverse the removal procedure.
208 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
Removing the Computer Access Panel
(Preparation for Disassembly on page
Spare part number
689382-001
207).