Bezel Blank - HP Elite 8300 Series Convertible Minitower Maintenance And Service Manual

Bezel Blank

Description
Bezel blank
On some models, there is a bezel blank covering the external drive bay that needs to be removed
before installing a drive. To remove a bezel blank:
1. Remove the computer access panel
2. Remove the front bezel
3. To remove the bezel blank, push the two retaining tabs that hold the bezel blank in place
towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 9-5
212 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
(Front Bezel on page
Removing a bezel blank
(Access Panel on page
209).
Spare part number
593230-001
208).