4.
Insert the hard drive into the bay as follows:
CAUTION:
of unnecessary force when installing any drive into the drive bay may result in damage to the
drive.
●
If you are installing a hard drive into one of the lower two bays (bays 5 and 6), slide the
hard drive into the drive bay until it locks. The drivelock automatically secures the drive in
the bay.
Figure 6-27
102 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Make sure the guide screws line up with the guide slots in the drive cage. The use
Installing a Hard Drive into the Lower Two Bays