Table of Contents
Advertisement
10.
Reconnect all power and data cables to the drives in the 5.25-inch drive bays.
11.
Remove the bezel subpanel as described in the
CAUTION:
Hold the subpanel straight when you pull it away from the front bezel. Pulling the
subpanel away at an angle could damage the pins that align it within the front bezel.
12.
Reposition the bezel blanks within the subpanel in the proper orientation for the minitower
configuration.
13.
Reposition the subpanel (rotate it 90º) with the logo at the bottom, then snap it back into the
bezel.
Figure 6-45
Changing from a Desktop to a Minitower Configuration
14.
Replace the front bezel and computer access panel.
15.
Reconnect the power cord and turn on the computer.
16.
Lock any security devices that were disengaged when the computer access panel was removed.
Bezel Blanks on page 80
Changing from a Desktop to a Minitower Configuration 121
section.
Hide quick links:
Advertisement
Table of Contents
