Quick Start; Unpack And Connect; Fine Tuning - Intelix 8002MCB-XLR User Manual

User Manual User Manual User Manual
User Manual User Manual
Keep the mixer and other equipment clean and free of dust by occasionally wiping with a soft,
damp cloth.
Protect the mixer from electrical damage by disconnecting it from the power source whenever it
will be unused for a week or longer.
1.3 Quick Start for the MC Series Mixer

1.3.1 Unpack and connect

1. Check mixer for shipping damage.
2. Verify whether special features are to be used. If so, configure the features before the unit is
mounted in the rack.
3. Turn both mixer and amplifier volume controls to zero.
4. Connect inputs and set the input pad switch for each channel to the appropriate level (either
mic or line). Set all unused channels to line level; factory default is in the mic position. .
5. Connect output and set the output pad switch at the appropriate (either mic or line) level.
1.3.2 Power and set up
1. Connect mixer's AC power supply.
2. With the volume controls turned down, power up mixer and amplifier.
3. Adjust the input volume for each channel by performing audio level tests. If necessary,
adjust the gain for individual channel(s).
4. Adjust the amplifier's volume controls and master output volume.
5. Adjust individual channel volume knobs to achieve the desired mix.

1.3.3 Fine tuning

1. In the event of excess bass, set the low cut filter switch to on.
2. If condenser mics are not otherwise powered, set the phantom power switch to on.
3. In the event of occasional excessive output level, set the limiter switch to on.
www.intelix.com
Intelix LLC
2222 Pleasant View Road
Middleton, WI 53562
MC Series
Phone: 608-831-0880
Toll-Free: 1-866-4-MATMIX
Fax: 608-831-1833
5