Panel Descriptions; Mc Series; Www.intelix.com - Intelix 8002MCB-XLR User Manual

MC Series

2.0 Panel Descriptions

1 2 3
A B C D E F
8002MCB-XLR and 8002MCB-PHNX Front Panel
Main/Auxiliary Bus Selector (one per channel) - 4-position switch which selects the
1
destination of the input channel. Route channels as follows:
A) Main Bus - M switch up, A switch down
B) Auxiliary Bus - M switch down, A switch up
C) Both the Main and Auxiliary Bus - M switch up, A switch up
A) Neither Bus - M switch down, A switch down
2 Channel Volume Knob (one per channel) - controls volume on the input channel.
3
Low Cut Switch - eliminates low frequency noise, such as rumbling.
Signal Clip LED - if lit (red), indicates a +18 dB or greater input signal which may cause
4
signal distortion.
Output Limiter Switch - eliminates clipping distortion of the output by controlling its
5
dynamic range.
6 Main Output Volume Knob - controls the output signal volume of the main bus.
LED Bar Graph Output Meter - displays output signal levels in decibels, ranging from -18
7 (green) to +12 (red) dB. May be set to indicate the signal of either the main or the auxiliary
bus and to indicate either the average or the peak signal.
8
Threshold Control - controls the signal level at which the compressor/limiter becomes active.
9
Ratio Control - controls the amount of compression of the signal above the threshold.
10
Auxiliary Ouput Volume Knob - controls the output signal volume of the auxiliary bus.
11
Headphone Jack - 1/4 inch-diameter TRS mono jack
Power Switch Button - "in" position powers unit; "out" position powers down unit. LED
12
displays status.
6
8002MCB-XLR
G

www.intelix.com

4 5 6 7 8 9
H
Intelix LLC Phone: 608-831-0880
2222 Pleasant View Road Toll-Free: 1-866-4-MATMIX
Middleton, WI 53562 Fax: 608-831-1833
User Manual User Manual
User Manual User Manual User Manual
10 11 12
I J