Intelix 8002MCB-XLR User Manual page 7

User Manual User Manual
User Manual User Manual User Manual
1 2 3
K B C D E F
8002MCB-XLR and 8002MCB-PHNX Rear Panel
A
Ground Lift Jumper - access to ground lift jumper J19.
AC Power Connector - mixer power supply input; accepts a 4-pin DIN connection from
B
an 18VCT 1.5 amp transformer.
Phantom Power Switch - when activated, supplies +15 VDC power (for condensor
C
microphones) to all channels with the mic/line switch set to mic position.
D
Auxiliary Bus Output Connector - XLR or Phoenix balanced/unbalanced, line-level connector.
Master Mic/Line Switch - selects master output as either mic level (-50 dBu) or line level
E
(0 dBu).
F Main Bus Output Connector - XLR or Phoenix balanced/unbalanced, line-level connector.
Auxiliary Input Connector - balanced/unbalanced, buffered, uncontrolled, line-level XLR or
Phoenix jack for an additional (ninth) input connection directly to the summing buses as
G
selected by the internal jumpers.
Input Mic/Line Switch - selects mic level (-50 dBu) or line level (0 dBu) for the corresponding
H
channel.
Channel Input Gain/Trim Control Potentiometer - Adjusts input stage gain over a range of 40
I
dBu.
Main Input Connector - XLR or Phoenix balanced/unbalanced connector.
J
K Ground Lug - Featured on the 8002MCB-PHNX, the ground lug allows the mixer to be tied
to a building ground, thereby eliminating ground loops.
8002MCB-PHNX
G
www.intelix.com
Intelix LLC
2222 Pleasant View Road
Middleton, WI 53562
4 5 6 7 8 9
H
Phone: 608-831-0880
Toll-Free: 1-866-4-MATMIX
Fax: 608-831-1833
MC Series
10 11 12
I J
7