Intelix 8002MCB-XLR User Manual page 18

MC Series
3.9.2 Complex linking
Complex linking allows multiple 8002MCB mixers to produce two separate mixes from the
same set of inputs. This method may also be used to implement a "mix minus" application by
creating two separate mixes. Both destinations are routed through the compressor/limiter,
since both destinations are driven by main outputs. Destination 1 receives inputs from mixer 1
with main/auxiliary bus selector set to main, and inputs from mixer 2 with main/auxiliary bus
selector set to aux. Destination 2 receives inputs from mixer 1 with main/aux set to aux, and
inputs from mixer 2 with main/aux set to main.
To complex link the mixers, take the following steps:
1) Set jumpers as shown in the drawing below: J17 alone in both mixers.
2) For both mixers, remove jumper from J2 position and place it in position J1. This
gives internal control of both auxiliary buses.
3) Using external cables, connect the two mixers as shown below.
18
Example of four mixers congfigured
via "simple linking."
www.intelix.com
Intelix LLC
2222 Pleasant View Road
Middleton, WI 53562
User Manual User Manual
User Manual User Manual User Manual
Phone: 608-831-0880
Toll-Free: 1-866-4-MATMIX
Fax: 608-831-1833