Quick Start - Intelix Psychologist User Manual

This section describes how to get your Psychologist system up and running. This section covers most
typical installations. If your system has any unusual features, or you need to know more about how
your system works, read the chapter associated with each step. For more detailed installation instruc-
tions, see System Installation Reference, on page 20.
1. Connect the Intelix 18 Volt transformer to the AC power connector on the rear of the
Mixer.
Make sure that the flat side of the connector faces down.
2. Plug the 18 Volt transformer into a grounded 110 VAC outlet.
3. Connect audio inputs and outputs.
Each input and output channel uses a triplet Phoenix connector. These connectors can be removed
from the chassis for ease of wiring. The three wires within each signal line must be connected to the
Phoenix connector as shown below.
6
Psychologist Mixer User Manual

Quick Start

Psychologist Mixer User Manual