Table of Contents
Advertisement
Installation
Extender/Repeater Kit Installation
(B130-101. B130-101A, B130-111 and B130-111A)
Note:
1. An extender/repeater kit installation can start with a B130-101, B130-101A,
2. The diagram above shows a B130-111A installation, with the maximum number of
3. A 1024 x 768 (60Hz) signal can be extended up to 1,000 ft. from the source to
14-01-055 933064.indd 19
continued
B130-111 or B130-111A. The only difference between these kits is the type of
remote unit that comes with them. The B130-101 and B130-101A come with
remote receiver units, and the B130-111 and B130-111A come with remote/
repeater units.
remote units connected. Installation will be the same for the B130-111, except there
will be no audio connections. Installation will be the same for the B130-101 and
B130-101A, except that instead of adding remote units to the end of the installation,
remote/repeater units will be inserted in between the local and remote units that
come with the kits.
the first remote/repeater unit in the installation. A 1024 x 768 (60Hz) signal can be
extended up to an additional 1,000 ft. between the first remote/repeater unit and the
last display in the installation. Up to 4 remote units (3 remote/repeaters and 1 remote
receiver) can be connected together to transmit a signal to up 4 points in a 2,000 ft.
chain.
19
1/9/2014 2:36:14 PM
Advertisement
Table of Contents
