• All operating systems supported • Plug and play, no software or drivers required • HDCP compliant Package Includes • B130-202 or B130-202A Transmitter Unit • B130-202 or B130-202A Receiver Unit • (x2) External Power Supplies (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A) •...
EDID Copy Compatibility issues can occur when EDID information is not properly communicated between the source and the display. The B130-202 and B130-202A include an EDID copy feature which stores a monitor’s EDID information in the transmitter and sends it to the source, ensuring optimal compatibility.
Page 5
EDID Copy 4. The Red Power LED will illuminate to indicate that the transmitter is receiving power. The Orange EDID LED will initially be off. When it illuminates, the EDID information from the connected monitor has been copied. Note: The Orange EDID LED blinks when an EDID scan is taking place, and stops blinking and illuminates when the scan is complete.
If you are not using the EDID copy feature, the transmitter will use a default set of EDID information. • The diagram above shows a B130-202 installation. The B130-202A installation will be the same, except for the addition of audio connections.
Page 7
Installation Instructions Make sure that the power to the source and other equipment being connected is turned off. Connect the VGA and audio* source to the INPUT port(s) on the transmitter unit using a VGA and audio* cable. (Optional) – Connect a local monitor and speakers* to the OUTPUT 1 and OUTPUT 2 ports on the transmitter unit using VGA and audio* cables.
What resolution are you trying to reach? The B130-202 and B130-202A are tested to support up to 1440 x 900 @ 60 Hz video resolution (See the Product Features section in this manual for details on max distance and resolution).
Page 9
Troubleshooting What type of cabling are you using? Inferior cabling can result in poor performance, so it is important that you use cables that can support the video resolution you are trying to obtain. To achieve maximum distance and resolution, 24AWG solid wire Cat5e/6 cable must be used.
Page 10
Troubleshooting Check your cabling for any damage that may have occurred during installation. If a cable connector is loosened from pulling through ceilings/walls, or the cable jacket is damaged, causing the wiring to be exposed, you will not be able to achieve maximum performance. Are the transmitter and/or receiver units located in an area that exposes them to elevated temperatures? If the product is overheating, it will not function properly.
Warranty & Product Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.
Page 12
1111 W. 35th Street, Chicago, IL 60609 • www.tripplite.com/support 14-11-117 • 93-333B_RevB 14-11-117-93-333B.indd 12 11/24/2014 2:51:43 PM...