Standard Extender Kit Installation - Tripp Lite B127A-1A1-BHBH Owner's Manual

Standard Extender Kit Installation

Notes:
•
Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.
•
To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded wire Cat6 cable or cable with a
gauge (AWG) size higher than 24 AWG will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
•
The installation diagram shows a B127A-1A1-BHBH unit.
•
External power is not required for remote receiver units due to Power
over Cable (PoC) technology incorporated in the transmitter units.
B127A-1A1-BHBH
extender kit
IR Control
-12-086-933CC9-EN.indd 10 -12-086-933CC9-EN.indd 10
Pad
IR Sensor
Monitor
HDR Player
LOCAL / TRANSMITTER
Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
Micro-USB cable
Toslink cable
IR Control
IR
Pad
Sensor
REMOTE / RECEIVER
10
USB Keyboard
USB Mouse
TV
12/29/2020 1:20:15 P 12/29/2020 1:20:15 P