Standard Extender Kit Installation - Tripp Lite B127A-1A1-BDBD Owner's Manual

Standard Extender Kit Installation

Model B127A-1A1-BDBH
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded-wire Cat6 cable or cable with a gauge (AWG) size higher
than 24 AWG will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower
gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG
solid-wire cabling.
3) The installation diagram shows a B127A-1A1-BDBH unit.
4) External power is not required for remote receiver units due to Power over Cable
(PoC) technology incorporated in the transmitter units.
B127A-1A1-BDBH extender kit



IR Control
1. Make sure all equipment in the installation—such as monitors, the
DisplayPort source and the transmitter—is powered OFF.
-03-131 933D25 RevC.indd 8 -03-131 933D25 RevC.indd 8
Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. DisplayPort cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
IR
Pad
SENSOR
 
Monitor
DisplayPort
Source
LOCAL / TRANSMITTER

Micro-USB cable

Toslink cable
IR Control

Up to 230 ft. (70 m) at 4K/60 Hz
8
IR USB
Pad
SENSOR KEYBOARD

MOUSE


TV
REMOTE / RECEIVER
USB
3/22/2021 3:19:56 PM 3/22/2021 3:19:56 PM