Package Contents Local Unit (L), Remote B B B B B B B B L L L L R R R R R R Unit (R) or Both (B) 1 or 2 External Power Supplies (Input: 100- 2 2 2 2 2 2 2 0 1 1 1 1 1 1 1 1 1 1 240V, 50/60Hz, 0.5A Output: 5V, 2A) Mounting Hardware...
Product Features • Support a maximum resolution of 1920 x 1440 @ 60Hz. • All operating systems supported. • Plug and play; no software or drivers required. • HDCP compliant. B130-101 • Extends a VGA Video signal (1024 x 768 @ 60Hz) up to 1,000 ft. from the source. • Features an additional VGA port, allowing for the connection of a local monitor. • Includes mounting hardware that allows units to be wall-mounted, rackmounted or pole mounted. • Features built-in equalization and gain controls to adjust the video image. B130-101A • Extends both a VGA Video (1024 x 768 @ 60Hz) and an audio signal up to 1,000 ft. from the source. • Features additional VGA and 3.5mm ports, allowing for the connection of a local monitor and speakers.
Product Features continued B130-101A-WP-1 • Extends both a VGA Video (1024 x 768 @ 60Hz) and an audio signal up to 1,000 ft. from the source. • Includes a VGA + Audio splitter cable, which allows for the connection of a local monitor and speakers. • All wallplate units come with RJ45 jacks, allowing for easy connection via standard patch cables; no 110 punchdown connections required. • Features built-in equalization and gain controls to adjust the video image. B130-101S • Extends both a VGA Video (1024 x 768 @ 60Hz) and RS232 Serial signal up to 1,000 ft. from the source. • Includes mounting hardware that allows units to be wall-mounted, rackmounted or pole mounted. • Features built-in equalization and gain controls to adjust the video image. B130-111 • Kit comes with both local transmitter and remote/repeater units. • Locate multiple monitors at different points in a chain of up to 2,000 ft. by connecting an additional remote receiver unit (B132-100-1 or B132-100-WP-1), or a remote/repeater unit (B132-110).
1,000 ft. from the first remote/repeater unit to the last set of display and speakers in the installation, for a maximum extension distance of 2,000 ft.. • Local unit includes additional VGA video and 3.5mm audio ports, allowing for the connection of a local monitor and speakers. • Features built-in Equalization and Gain controls to adjust the video image. • Includes mounting hardware that allows units to be wall-mounted, rackmounted or pole mounted. B130-101-U • Extends a VGA Video signal (1024 x 768 @ 60Hz) up to 500 ft. from the source. • Power is supplied by the USB connection on the local transmitter unit; no external power supplies are required. • Dongle-style local and remote units come with built-in VGA connectors; no external VGA cables are required.
Product Features continued B132-002-1 • Works with the B132-100-1 and B132-100-WP-1 remote units to extend a VGA Video signal (1024 x 768 @ 60Hz) up to 1,000 ft. from the source. • Able to transmit a single VGA Video signal to 2 monitors. • Includes mounting hardware that allows unit to be wall-mounted, rackmounted or pole mounted. B132-002A • Works with the B132-100A and B132-100A-WP-1 remote units to extend both a VGA Video (1024 x 768 @ 60Hz) and an audio signal up to 1,000 ft.
Product Features continued B132-004A • Works with the B132-100A and B132-100A-WP-1 remote units to extend both a VGA Video (1024 x 768 @ 60Hz) and an audio signal up to 1,000 ft. from the source. • Features additional VGA and 3.5mm ports, allowing for the connection of a local monitor and speakers. • Transmits a single VGA Video and audio signal to up to 5 sets (4 remote, 1 local) of monitors and speakers. • Expand the number of connected monitors/speakers to up to 25 (24 remote, 1 local) by daisychaining up to 6 local units together.
Product Features continued B132-110 • Both extends and expands your Tripp Lite VGA over Cat5 installation, allowing you to locate multiple monitors at different points in a chain of up to 2,000 ft.. • Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing video to up to 4 remote displays in a full chain. • Extend a 1024 x 768 (60Hz) signal up to 1,000 ft. between the local transmitter and the first remote/repeater unit in the installation. • Extend a 1024 x 768 (60Hz) signal up to an additional 1,000 ft. from the first remote/repeater unit to the last display in the installation, for a maximum extension distance of 2,000 ft..
Note: The B132-004-1 and B132-004A can also be mounted to a Tripp Lite B132-004-RB 1U rackmount bracket. Up to 3 B132-004-1 or B132-004A local units can be connected to a B132-004-RB.
Installation will be the same for other extender kit models, with the exception of units featuring VGA + Audio, VGA + RS232 serial or VGA only. The B130-101-U gets power from the USB cable built-in to the local unit, and doesn’t require external supplies.
Page 13
Female adapter cable to the 3.5mm INPUT port on the local unit, and then connect the computer to the adapter using a DB9 cable. (B130-101-U only) – Connect the built-in VGA and USB connectors on the local unit to the source computer.
Page 14
DB9 cable. Connect the external power supply to the remote unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The B130-101-U gets power from the USB cable built-in to the local unit, and doesn’t require...
For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K. 4. To achieve maximum resolution, it is recommended that you use Tripp Lite P502-Series VGA Video or P504-Series VGA Video and Audio cables with RGB coax.
Page 16
Repeat step 7 for each remote unit in the installation. Connect the external power supply to the remote unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). Repeat step 9 for each remote unit in the installation.
For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K. 4. To achieve maximum resolution, it is recommended that you use Tripp Lite P502-Series VGA Video or P504-Series VGA Video and Audio cables with RGB coax.
Page 18
Connect the external power supply to the first local unit in the installation, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). Repeat step 6 for each additional local unit in the installation.
Installation will be the same for the B130-111, except there will be no audio connections. Installation will be the same for the B130-101 and B130-101A, except that instead of adding remote units to the end of the installation, remote/repeater units will be inserted in between the local and remote units that come with the kits.
Page 20
The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24Awg, will result in shorter extension distance. All Tripp Lite N202- Series cables are made with 24Awg solid wire cabling. Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk cables.
Page 21
OUTPUT port(s) using a VGA Video and Audio* cable. Connect the external power supply to the remote/repeater unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The Red power LED and the Green RJ45 LEDs illuminate to indicate the unit is receiving power.
Installation continued Non-Kit Remote/Repeater Installation Note: 1. The diagram above shows a B132-004-1 installation with the maximum number of remote units connected. A B132-004A installation will be the same, except there will be audio connections. B132-002-1 and B132-002A local units come with 2 ports instead of 4, and do not feature additional ports for a local monitor and speakers.* 2.
Page 23
The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24Awg, will result in shorter extension distance. All Tripp Lite N202- Series cables are made with 24Awg solid wire cabling. Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk cables.
Page 24
OUTPUT port(s) using a VGA Video and Audio* cable. Connect the external power supply to the remote/repeater unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The Red power LED and the Green RJ45 LEDs illuminate to indicate the unit is receiving power.
Installation continued Non-Kit Daisychain Remote/Repeater Installation (B132-004A and B132-004-1 only) Note: 1. The diagram above shows a B132-004A installation with the maximum number of remote units connected. A B132-004 installation will be the same, except there will be no audio connections. B132-002-1 and B132-002A local units cannot be daisychained.
Page 26
The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24Awg, will result in shorter extension distance. All Tripp Lite N202- Series cables are made with 24Awg solid wire cabling. Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk cables.
Page 27
VGA Video and Audio* cable. Connect the external power supply to the remote/repeater unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The Red power LED and the Green RJ45 LEDs illuminate to indicate the unit is receiving power.
1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.