Installation; Extender Kit Installation - Tripp Lite B130-101 Owner's Manual

Installation

Extender Kit Installation

B130-101-WP-1, B130-101A-WP-1, B130-101S, B130-101-U)
Note:
1. The diagram above shows a B130-101A VGA + Audio Extender Kit installation.
Installation will be the same for other extender kit models, with the exception of
units featuring VGA + Audio, VGA + RS232 serial or VGA only. The B130-101-U
gets power from the USB cable built-in to the local unit, and doesn't require
external supplies.
2. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
3. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable
must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge
(Awg) size higher than 24Awg, will result in shorter extension distance. All Tripp
Lite
N202-Series cables are made with 24Awg solid wire cabling. Tripp Lite N022-
01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk cables. For
optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as
Tripp Lite P524-01K. For the B130-101-U, use Zero-Skew cable for distances
between 250 and 500 ft.
4. To achieve maximum resolution, it is recommended that you use Tripp Lite
P502-Series VGA Video or P504-Series VGA Video and Audio cables with RGB
coax.
*If this is a feature of your extender kit.
14-01-055 933064.indd 12
(B130-101, B130-101A,
Local Unit
12
Remote Unit
1/9/2014 2:36:13 PM