X 2 Extender Kit With Remote/Repeater Installation - Tripp Lite B126-2A1 Owner's Manual

Notes:
1. Test to make sure that the entire installation works properly before
2. The diagram below shows the maximum extension distance when using
3. The B126-2A1 is set to transmit a stereo audio signal by default.
BLU-RAY
1
2
3
13-08-043 93-32D0.indd 7
1 x 2 Extender Kit with
Remote/Repeater Installation
running cables through ceilings/walls.
either Cat5e or Cat6 cabling. 24 AWG, solid wire Cat5e/6 cable, such
as Tripp Lite's N202-Series, is required to achieve maximum distance
and resolution.
Press the Audio button on the transmitter unit to switch to 7.1-channel
surround sound audio. (7.1-channel surround sound signal will be
Multi-Channel or PCM)
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
OPTIONAL LOCAL
MONITOR
B126-2A1 LOCAL
TRANSMITTER
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
Make sure all devices being connected are powered OFF.
Connect the HDMI source to the INPUT port on the transmitter unit
using a Tripp Lite P568-Series High-Speed HDMI Cable.
Optional: Connect a monitor to the LOCAL port on the transmitter
unit using a Tripp Lite P568-Series High-Speed HDMI Cable.
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
B126-110 REMOTE B126-110 REMOTE
REPEATER REPEATER
7
Up to 175 ft. at 1080i (60Hz) MONITOR 1 MONITOR 2
Up to 125 ft. at 1080p (60Hz)
B126-2A1 REMOTE
RECEIVER
B126-110 REMOTE
REPEATER
8/28/2013 2:17:39 PM