Page 2
Safety Information • To reduce the risk of electric shock, do not expose the product to moisture. • Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fire.
Page 3
Product Features • Features built-in Equalization and Gain controls to adjust the video image • Supports video resolutions up to 1920x1440 • No drivers required Optional Accessories • P502-Series Monitor Cables with RGB Coax, HD15 Male/Male • N020-01K-GY Cat5e Bulk Stranded Cable, 1000 ft. •...
Page 4
Features Source Video-In Port: HD15 Female Connector. Local Unit Power LED: This LED illuminates when the external power supply is connected and the unit is receiving power. Local Unit Power Jack: The 12.6V, 3A external power supply plugs in here. 110 Punchdown Connector: Connect Cat5/5e/6 cable between the 110 Punchdown Connectors on the local and remote units.
Page 5
Installation Note: You should test to make sure the entire installation works properly before pulling cables through ceiling/walls. Connect the Male end of the included VGA splitter cable to the HD15 port on the source computer. Connect one of the Female connectors on the included VGA splitter cable to the HD15 port on the local unit.
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
Need help?
Do you have a question about the B130-101-WP and is the answer not in the manual?
Questions and answers