Table of Contents
Advertisement
Menu Navigation
Main Level
From the Idle or Start-up display, pressing the Menu key will enter the first level of options; these options are
the most commonly used ones. The lower three lines will look as below:
menu = exit
MAKE MEDIA FILES
ENTER
NEXT
There are 8 options and they are:
MAKE MEDIA FILES
EMPTY THIS BIN ?
SELECT SOURCE
EMPTY ALL BINs ?
RECORD SETUP
PLAY SETUP
SYSTEM SETUP
FIRMWARE REVISION
Pressing the Next key will bring up the next option down on the list and will return to the top option from the
bottom. Table 1 details the actions for each option.
Menu Option
MAKE MEDIA FILES
EMPTY THIS BIN
SELECT SOURCE
EMPTY ALL BINS
RECORD SETUP
PLAY SETUP
SYSTEM SETUP
FIRMWARE REVISION
Prepares the content to be seen by the computer in the HDD mode. The
operating system environment is previously set to either FAT32 or NTFS.
When there is recording content, This action needs to be taken before
connecting as an HDD.
Empties or erases the content within the presently selected bin, this step is
irrevocable once the final question has been asked.
When in DV mode, the signal to be recorded can be chosen to come either
from the Firewire input (DIG) as a digital signal or come from the breakout
cable as an NTSC or PAL compatible analog signal (ANA)
Empties or erases the content in ALL of the bins. This step is irrevocable once
the final question has been asked.
Enters the Record Setup Menu group detailed in the named section
Enters the Play Setup Menu group detailed in the named section
Enters the System Setup Menu group detailed in the named section
Displays the current revision of the recorder's firmware
- 12 -
Action taken
Table 1 Menu Main Level
Advertisement
Table of Contents
