Table of Contents
Advertisement
Rear Panel
GPI IN
The GPI socket can be used for simple external control.
The DN-600 can accept pulse or level trigger inputs, which can trigger
record or playback and pause commands
RS-232
Used to remotely control the DN-600.
Composite Video input & output
The connection is composite video input.
AUDIO IN
Accepts a RCA jack plug for audio input (Left &Right).
TC IN
The connection is for time code single input.
Audio input & output.
2 channels XLR Balanced Audio input & output.
DC In Socket
The connection is used for the battery or the AC adapter.
Power On / Off
Power On/Off Switch. Switches the power On / Off
Grounding Terminal
When connecting this unit to any other component, make sure that it is
properly grounded by connecting this terminal to an appropriate point.
When connecting, use the socket and be sure to use wire with a cross-
sectional area of at least 1.0 mm2.
- 10 -
Advertisement
Table of Contents
