Keyboard - NEC VERSA LXi Service And Reference Manual

Note
The Power button has a 4 second power override. Hold the Power button in place for 4
or more seconds to power off the system.
In Windows 2000/98, the Power button is configured using Control Panel. From the Windows
taskbar select Start, Settings, Control Panel, Power Management, and the Advanced tab. The
following settings are available under "When I press the power button on my computer."
Standby — Press the Power button to put the system into Standby mode.
!
Hibernate — Press the Power button to put the system into Hibernate mode.
!
Shutdown — Press the Power button to shutdown (power off) the system.
!

Keyboard

The NEC Versa keyboard offers the following features, which are described after the figure.
A – Function Keys
B – Numeric Keys
C – Cursor Control Keys
Function keys — Twelve function keys,
!
Versa keyboard. These keys work together with the
Several keys are preprogrammed with dual functions, some of which are printed in blue
on the key.
Function keys are application-driven. See the specific application's user guide for
information about how each function key works within the application you are using.
The following function key combinations are preprogrammed for the NEC Versa LXi
computer.
Fn-F3
out.
Fn-F4
Keyboard
— Toggles between four video modes; LCD, CRT, both (LCD and CRT) or TV
— Sets standby power management mode on, in Windows NT.
In Windows NT, press any key to resume from Standby mode.
No function in Windows 2000/98. In Windows 2000/98, Standby is equivalent to
Windows NT Suspend mode. To resume from Windows 2000/98 Standby mode,
press the Power button.
D – Windows Keys
E – Control Key
F – Control Keys
through , are available on the NEC
F1 F12
key to activate special functions.
Fn
System Overview 1-5