A – Screw
Locate and remove the two screws securing the file bay device bracket. Remove the
3.
bracket.
A – Screw
Disconnect the battery locked sensor cable from BP4 on the connector board.
4.
Disconnect the internal CPU fan cable from BP3 on the connector board.
5.
Remove the connector board from the system.
6.
Internal CPU Fan Assembly
Use the following procedure to remove the internal fan assembly from the system.
Remove the keyboard, front cover, LCD Panel, Mini PCI/LAN (if present), audio board,
1.
main board, VersaBay III device bracket, file bay device bracket, and connector board from
the system.
Lift the fan cover and fan off the system.
2.
Removing the VersaBay III bracket screw
Removing the file bay device bracket screws
Disassembly and Reassembly 3-25