Muratec F-110 Field Engineering Manual page 30

3-36 Speaker
1. Before you remove the speaker, you should remove:
– Rear cover (see page 3-9)
– Shield Engine ass'y (see page 3-19)
– SMPS board (see above)
2. Remove one connector that connects the speaker to
the main board and two screws securing the speaker,
then remove the speaker.
3-37 LIU board
1. Before you remove the LIU board, you should
remove:
– Rear cover (see page 3-9)
– Shield Engine ass'y (see page 3-19)
2. Remove three screws and three connectors from the
LIU board, then remove the board from the main
frame.
Disassembly and Reassembly
3-21