Muratec F-110 Field Engineering Manual page 11

Disassembly and Reassembly
3-2 Cradle
1. Push the lever and remove the cradle as shown
below.
3-3 White Roller
1. Open the OPE cover.
2. Push the bushing on the end of the roller slightly
inward, then rotate it until it reaches the slot.
Then lift, the roller out.
Note : Check the roller for any dirt. If dirty, wipe it off with
soft cloth dampened with water. If the roller is
heavily worn, replace it with a new one.
3-2
3
2
1
Bushing
A
B
White Roller
Control Panel