5-3. Imaging problems (for analog only)
1. Display position is incorrect.
2. Vertical bars appear on the screen or a
part of the image is flickering.
3. Whole screen is flickering or blurring.
5-4. Other problems
1. The adjustment menu does not appear.
2. All control buttons are disabled.
3. The auto adjustment function does not
work.
4. No audio output.
Problem
Problem
Possible cause and remedy
• Use<Position>intheAdjustmentmenutocorrectthe
imageposition(see"Tocorrectthescreenposition
<Hor.Position><Ver.Position>"(page13)).
• Iftheproblempersists,usethegraphicsboard'sutility
ifavailabletochangethedisplayposition.
• Use<Clock>intheAdjustmentmenutoadjustit(see
"Toeliminateverticalbars<Clock>"(page12)).
• Use<Phase>intheAdjustmentmenutoadjustit(see
"Toremoveflickeringorblurring<Phase>"(page13)).
Possible cause and remedy
• Checkwhethertheoperationlockfunctionworks(see
"3-3.LockingButtons"(page18)).
• Checkwhethertheoperationlockfunctionworks(see
"3-3.LockingButtons"(page18)).
• Thisfunctiondoesnotworkduringdigitalsignalinput.
• ThisfunctionisintendedforuseontheMacintosh
andonAT-compatiblePCrunningWindows.Itdoes
notworkproperlywhenanimageisdisplayedonly
onapartofthescreen(commandpromptwindow,for
example)orwhenablackbackground(wallpaper,etc.)
isinuse.
• Thisfunctiondoesnotworkcorrectlywithsome
graphicsboards.
• Checkwhetherthestereominijackcableisconnected
properly.
• Checkwhethervolumeissetto0.
• CheckthePCandaudioplaybacksoftwaretosee
whethertheyareconfiguredcorrectly.
Chapter5Troubleshooting
25