Imaging Problems (Analog Only); Other Problems - Eizo DuraVision MDF2701W User Manual

5 | Troubleshooting

5.3 Imaging Problems (Analog only)

Screen is misaligned
• Use "Hor. Position" or "Ver. Position" in the Setting menu to adjust the positioning of the
screen (see
• If the graphics board's utility has a function to change the position of the image, use that
function to adjust the position.
Vertical lines appear on the screen / Part of the screen is flickering
• Try adjusting "Clock" in the Setting menu (see
The whole screen appears to flicker or bleed
• Try adjusting "Phase" in the Setting menu (see

5.4 Other Problems

The Setting menu does not appear
• Check whether the operation lock function is enabled (see
Even when the mouse or keyboard are used, the PC does not return from
sleep.
• Turn the setting "On" for "Compatibility Mode" on the "Administrator Settings" menu (see
Compatibility Mode
22
Analog Adjustment - Hor. Position / Ver. Position
[} 19]).
[} 14]).
Analog Adjustment - Clock
Analog Adjustment - Phase
Key Lock
[} 14]).
[} 14]).
[} 18]).