2-3. Adjusting Color
●
To select the display mode (FineContrast mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
Custom
EyeCare
sRGB
Text
Procedure
1. Choose <Color> from the Adjustment menu, and press
2. Choose <Color Mode> from the <Color> menu, and press
3. Use
or
4. Press
to exit the adjustment.
●
To perform advanced adjustments
The <Color> menu of the Adjustment menu allows you to configure and save a separate set of color settings
for each mode.
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• Perform the range adjustment first when adjusting color for analog signals (see
automatically <Range>" (page
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics.
Make fine color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in "%" or "K" are available only as reference.
●
Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
√: Adjustable -: Not adjustable
Icon
Brightness
Contrast
Temperature
Gain
Reset
Selectoneoftheseusermodestodefineadesiredsetofparametersettings.
Allowsthebrightnesstobesetlowerthanpossiblewithothermodes.
SuitableforcolormatchingwithsRGBcompatibleperipherals.
Suitablefordisplayingtextsforwordprocessingorspreadsheets.
for adjustment.
14)).
Function
Custom
√
√
√
√
√
Purpose
.
.
"To adjust color gradation
FineContrast mode
EyeCare
sRGB
√
√
-
-
√
-
√
-
√
√
Chapter2AdjustingScreens
Text
√
√
√
-
√
15