Imaging Problems (Analog Only); Other Problems - Eizo FlexScan S1934 User Manual

Hide thumbs Also See for FlexScan S1934:

Table of Contents

5 | Troubleshooting

5.3 Imaging Problems (Analog only)

Screen is misaligned

• Use "Hor. Position" or "Ver. Position" in the Setting menu to adjust the positioning of the

screen (see

• If the graphics board's utility has a function to change the position of the image, use that

function to adjust the position.

Vertical lines appear on the screen / Part of the screen is flickering

• Try adjusting "Clock" in the Setting menu (see

The whole screen appears to flicker or bleed

• Try adjusting "Phase" in the Setting menu (see

The Setting menu does not appear.

• Check whether the operation switch lock function is active (see

Cannot select items in the Setting menu.

• Items that are displayed with gray text cannot be changed.

• "Color" items cannot be changed in some color modes. Setting the color mode to "User

1" or "User 2" will allow you to change all items (see

No audio output

• Check whether the stereo mini jack cable is connected properly.

• Check whether the volume is set to "0".

• Check the PC and audio playback software to see whether they are configured

correctly.

• Check the "Sound Source" setting when using the DisplayPort input (see

[} 19]).

Analog Adjustment - Hor. Position / Ver. Position

[} 20]).

Analog Adjustment - Clock

Analog Adjustment - Phase

Key Lock

Color

[} 16]).

[} 20]).

[} 24]).

Sound Source

Table of Contents