Page 1
User’s Manual Touch Panel Color LCD Monitor Important Carefully read this User’s Manual and Setup Manual before use to use the monitor correctly. • See the Setup Manual for monitor installation and connection. • For the latest product information including the "User’s Manual", refer to our web site: www.eizoglobal.com...
Page 2
EIZO Corporation. EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said information.
1 | Introduction 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1.1 Features • 12-inch screen • Supports 1024 x 768 resolution • Equipped with an LED backlight LCD panel Compared to conventional CCFL backlight LCD panels, it has a higher power efficiency and lower power consumption.
Basic Adjustment / Settings | 2 2 Basic Adjustment / Settings 2.1 Switching the Input Signal When a monitor has multiple signal inputs, the signal to display on-screen can be changed. 1. The input signal switches each time you press The selected input port name is displayed on the top right of the screen. 2.2 Switching the Display Mode (Color Mode) This function allows easy selection of a display mode according to monitor application.
3 | Advanced Adjustment / Setting 3 Advanced Adjustment / Setting This chapter describes the advanced monitor adjustment and setting procedures using the Setting menu. For basic functions, see 2 Basic Adjustment / Settings [} 5]. 3.1 Basic Operation of the Setting Menu 1.
Advanced Adjustment / Setting | 3 3.2 Setting Menu Functions 3.2.1 Color The color mode settings can be adjusted according to personal preference. The adjusted settings are saved for each color mode. Functions that can be adjusted differ depending on the color mode. ✓: Adjustable, -: Not adjustable Function Color Mode...
Page 8
3 | Advanced Adjustment / Setting The screen becomes reddish at low color temperatures and bluish at high color temperatures, similar to the temperatures of a flame. A gain preset value is set for each color temperature setting value. Note • The value shown in "K" is available only as a reference. •...
Advanced Adjustment / Setting | 3 Reset Resets any color adjustments for the currently selected color mode back to the default settings. 3.2.2 Signal Set the details regarding input signal, such as the screen size and color format. • D-Sub input • HDMI® / DisplayPort™ input The functions that can be set differ depending on the input signal.
Page 10
3 | Advanced Adjustment / Setting • "Aspect Ratio" Images are stretched to full screen. Since aspect ratios are maintained, blank horizontal or vertical borders may appear. • "Dot by Dot" Displays the image at the set resolution or size specified by the input signal. Note •...
Page 11
Advanced Adjustment / Setting | 3 Note • When "YUV" is selected in "Input Color Format", the setting is automatically set to "Limited". Additionally, when "Auto" is selected and the monitor determines the input color format to be YUV, the setting is automatically set to "Limited". Analog Adjustment - Auto Screen Adjust Screen flicker, display position and size and be automatically adjusted.
3 | Advanced Adjustment / Setting Analog Adjustment - Hor. Position / Ver. Position The display position (horizontal, vertical) of the screen can be adjusted. Note • Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display images correctly.
Advanced Adjustment / Setting | 3 DDC/CI Settings: "On" / "Off" Switch between enabling or disabling DDC/CI communication. Monitor Reset Restores all settings to their default settings except for the following settings: • Settings on the "Administrator Settings" menu 3.2.4 Languages Settings: "English" / "German" / "French" / "Spanish" / "Italian" / "Swedish" / "Japanese" / "Simplified Chinese"...
4 | Administrator Settings 4 Administrator Settings This chapter describes how to configure monitor operation using the "Administrator Settings" menu. 4.1 Basic Operation of the "Administrator Settings" Menu 1. Press to turn the monitor off . 2. Holding down and pressing for more than 2 seconds will turn on the monitor. The "Administrator Settings"...
On-Screen Logo Settings: "On" / "Off" When the monitor is turned on, the EIZO logo appears on the screen. When this function is set to "Off", the EIZO logo does not appear. Key Lock Settings: "Off"...
Page 16
4 | Administrator Settings • "Off" (default setting) Enables all buttons. • "Menu" Locks the button. • "All" Locks all buttons except the power button. RS-232C Settings: "On" / "Off" This setting is for when you connect a RS-232C cable and use the touch panel. In the default settings, RS-232C serial transfer is disabled.
Troubleshooting | 5 5 Troubleshooting 5.1 No Picture Power indicator does not light up. • Check whether the power cord is connected properly. • Press Power indicator is lighting white. • Increase the various adjustment values for "Brightness" and "Gain" in the Setting menu (see Color [} 7]).
[} 7]). (The LCD monitor backlight has a limited life span. If the screen becomes dark or begins to flicker, contact your local EIZO representative.) Letters and images are blurred • Check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor (see 6.2 Compatible Resolutions...
Troubleshooting | 5 Fog remains even after wiping the screen / Condensation inside the glass • If fog remains even after wiping the screen, there may be condensation on the inside of the protective glass on the LCD panel. Wait a while for the condensation to disappear. Even if condensation occurs on the inside of the glass in this manner, it does not cause malfunction or deterioration of the product.
5 | Troubleshooting 5.4 Touch Panel Problems Attention • For information on how to install and use the touch panel driver, refer to the User's Manual of the touch panel driver. The touch and cursor positions are misaligned / The cursor jumps •...
Troubleshooting | 5 5.5 Other Problems The Setting menu does not appear • Check whether the operation lock function is enabled (see Key Lock [} 15]). Cannot select items in the Setting menu. • Items that are displayed with gray text cannot be changed. •...
6 | Reference 6 Reference 6.1 Connecting Multiple PCs This product can be connected to multiple PCs and allows you to switch between the connections for display. Connection Examples HDMI DisplayPort D-Sub HDMI cable DisplayPort cable D-Sub cable (DisplayPort - DisplayPort) (D-Sub - D-Sub) (HDMI - HDMI) HH200HS PP200...
Reference | 6 Note • You can select the input signal to display using the operation button on the rear of the monitor. For details, see 2.1 Switching the Input Signal [} 5]. • This product provides a function that automatically recognizes the connector through which signals are input, and displays images on the screen accordingly.
ENERGY STAR is a registered trademark of the United States Environmental Protection Agency in the United States and other countries. EIZO, the EIZO Logo, ColorEdge, CuratOR, DuraVision, FlexScan, FORIS, RadiCS, RadiForce, RadiNET, Raptor, and ScreenManager are registered trademarks of EIZO Corporation in Japan and other countries.
Original Purchaser or any third parties other than as provided under this Warranty. EIZO and Distributors will cease to hold or store any parts (excluding design parts) of the Product upon expiration of seven (7) years after the production of the Product is discontinued.
Page 26
The Warranty Period for any replaced and/or repaired product under this Warranty shall expire at the end of the original Warranty Period. EIZO OR DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY DAMAGE TO, OR LOSS OF, DATA OR OTHER INFORMATION STORED IN ANY MEDIA OR ANY PART OF ANY PRODUCT RETURNED TO EIZO OR DISTRIBUTORS FOR REPAIR.