Displaying Monitor Information <Information - Eizo DURAVISION FDX1501 User Manual

●
To set input signal selection <Input Signal>
Setting
Auto
Manual
Note
• When "Auto" is selected for <Input Signal>, the monitor's power-saving function works only when the two PCs are in
the power-saving mode.
Procedure
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Input Signal> from the <Others> menu, and press
The <Input Signal> menu appears.
3. Select "Auto" or "Manual" with
4. Press to exit the adjustment.
6-3. Displaying Monitor Information <Information>
This function allows you to display the input signal status, current resolution and model name.
Information 1/3: Input signal status, resolution, and horizontal/vertical scan frequencies
Information 2/3: DDC/CI Enable/Disable status
Information 3/3: Model name, serial number, and usage time
Procedure
1. Choose <Information> from the Adjustment menu, and press
The <Information> menu appears.
2. Then, press
Attention
• The usage time is not always "0" when you purchase the monitor due to factory inspection.
ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
ThemonitordetectsonlythePC'ssignalscurrentlydisplayingautomatically.Selectan
activeinputsignalwith .
or .
to check settings, etc.
Function
.
.
.
Chapter6Reference
29