Page 1
Setup Manual Touch Panel Color LCD Monitor Important Carefully read this Setup Manual and User's Manual (downloaded from the website) before use to use the monitor correctly.Please retain this manual for future reference. • Refer to the "User’s Manual" for information on the setting / adjustment of the monitor.
Page 2
EIZO Corporation. EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said information.
PRECAUTIONS PRECAUTIONS Important This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. Please read and follow the "PRECAUTIONS" section carefully before use. Symbols on the unit Symbol This symbol indicates...
Page 4
WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your EIZO representative for advice. Attempting to use a malfunctioning unit may result in fire, electrical shock, or equipment damage.
Page 5
Before installation, make sure that desks, walls, or any other installation surface has adequate mechanical strength. If the unit falls, disconnect the power immediately and ask your local EIZO representative for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electrical shock.
Page 6
PRECAUTIONS CAUTION CAUTION Disconnect cables and remove accessories when moving the unit. Otherwise, the cables or accessories may become detached when moving, resulting in injury. CAUTION Do not block the ventilation slots on the cabinet. • Do not place any objects on the ventilation slots. •...
When the screen becomes dark or begins to flicker, please contact your local EIZO representative. • Do not scratch or press on the LCD panel with any sharp objects, at this may result in damage to the LCD panel.
About This Product • (Cautions for the Use of the Touch Panel) During touch operation Be careful of the following points. Otherwise, damage may occur to the monitor. – Do not strongly press, scratch, or poke the touch panel. – Do not touch the touch panel with hard objects such as ballpoint pens or metals. About the Installation •...
CONTENTS CONTENTS PRECAUTIONS ......................Important ......................Symbols on the unit ................About This Product ....................About the Usage of This Product ................ About the LCD Panel ..................About the Installation................... Cleaning ......................To Use the Monitor Comfortably ................. 1 Introduction ........................ 10 Package Contents....................
1.1 Package Contents Check that all of the following items are contained in the package. If any of these are missing or damaged, contact your dealer or local EIZO representative listed separately. Note • The User’s Manual is not included with the product. Please download it from our web site using the steps below.
Introduction | 1 1.2 Controls and Functions button Switches the input signals to be displayed. button Switches the color mode. button Displays the Setting menu, confirms the adjustment items of each menu, and saves adjustment results. button Selects menu items, adjusts/sets functions, and displays the brightness adjustment screen while the Setting menu is displayed.
Page 12
1 | Introduction These cannot be used simultaneously. In the default settings, RS-232C serial transfer is disabled. For details on how to change the settings, see "Functions of the Administrator Settings Menu" in the User's Manual.
Installation / Connection | 2 2 Installation / Connection 2.1 Installing 2.1.1 Installation conditions The installable orientations and movement range (tilt angle) are as follows: • Orientation No rotation Rotate 90˚ right Rotate 180˚ Rotate 90˚ left • Movement range (tilt angle) Up: 90˚...
Page 14
2 | Installation / Connection 1. Insert the monitor into the opening of the panel. Installable panel opening dimensions: 302 ± 0.5 mm x 241 ± 0.5 mm Front: Back: Contact area between monitor and panel (gray Contact area between metal panel fitting and panel area) (gray area) Panel opening...
Page 15
Installation / Connection | 2 2. Insert the two pronged ends of the provided metal panel fitting into the metal panel fitting holes on the monitor (4 mounting points). Metal panel fitting Metal panel fitting hole 3. While ensuring that the pronged ends of the metal panel fitting are properly inserted into the metal panel fitting holes on the monitor, tighten the screws on the metal panel fitting with the specified torque (0.6 N·m to 0.7 N·m) to secure them in place.
2 | Installation / Connection Attention • While tightening the screws on the metal panel fitting, pull the screw heads backward to confirm that the pronged ends are securely attached to the monitor. If the pronged ends are not securely attached, the metal panel fitting may become detached even after tightening the screws. •...
Page 17
Installation / Connection | 2 2. Use either the USB cable or the RS-232C cable to connect the PC to the monitor. USB-B USB-A USB cable (included) RS-232C RS-232C RS-232C cable*1 (commercially available) Cross type. The connector type on the monitor is D-Sub 9-pin. In the default settings, RS-232C serial transfer is disabled.
Page 18
2 | Installation / Connection 2. Strip the wire insulation (strip length: 7 mm ± 0.5 mm). If tip treatment is required, attach a rod terminal (ferrule). Use ferrules made by Phoenix Contact. Rod terminal 7 mm±0.5 mm 3. Insert the wires into the terminal block and tighten the clamp screws with a flat-head screwdriver with a tip width of 2.5 mm (recommended torque: 0.5 N·m to 0.6 N·m).
Installation / Connection | 2 Using the DC power jack (DC-IN) 1. Insert the DC power cord firmly into the DC power jack. 2.3 Turning On the Power 1. Press to turn on the monitor. The power switch indicator of the monitor lights up blue. If the power indicator does not light up, refer to "No Picture"...
2 | Installation / Connection 4. Reboot the PC. 2.5 Correct the touch position Correct the touch position according to the User's Manual of the touch panel driver. Note • If the installation location is changed, correct the touch position.
Supported Operating Systems Windows 11 Windows 10 (32 bit / 64 bit) These cannot be used simultaneously. EIZO support will end when OS vendor support ends. 3.1.3 Video Signals Input Terminals DisplayPort (HDCP 1.3 compatible) x 1, HDMI (HDCP 1.4 compatible)
3 | Reference 3.1.4 Communication Port USB-B connector (upstream) x 1 Standard USB Specification Revision 2.0 RS-232C Port D-Sub 9-pin (male) x 1 3.1.5 DC Power Input DC 12 V ± 10 %, 1.0 A max. Maximum Power Consumption 12 W or less Power Save Mode With USB connection 1.0 W or less...
Reference | 3 3.2 Pin Specifications 3.2.1 DC power terminal block Input signal connection Pin No. Input signal DC 12 V GND (Ground) Power sequencing DC 12 V 10 V 10 V t1 < 50 ms 30 ms < t2 3.2.2 Control button extension connector Connector used: S3B-PH-SM4-TB(LF)(SN) (JST) Input signal connection Pin No.