4-3. Enabling/Disabling Automatic Brightness
Adjustment "Auto EcoView"
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Press
.
The EcoView menu appears.
2. Select "On" or "Off" with
3. Press
to exit the adjustment.
Note
• For this reason, as <Brightness> in the Adjustment menu is changed, the auto adjustment range is also changed.
4-4. Setting Indicator "EcoView Index"
This indicator shows the power saving ratio, power reduction and CO
the monitor. The power saving ratio comes to high as the indicator level meter lights towards right.
Procedure
1. Press
.
The EcoView menu appears.
Note
• Power reduction: the backlight's reduction of electricity consumption as a result of the adjusted brightness value.
• CO
reduction: converted from the "Power reduction" value, this is an estimate of the quantity of CO
2
reduced when using the monitor for 1 hour.
* Thenumericvalueisaresultofacalculationbasedonadefaultvalue(0.000555t-CO
byaministerialordinance(2006,MinistryofEconomy,TradeandIndustry,MinistryofEnvironment,civil
codearticle3)andmaydifferdependingoncountryandyear.
4-5. Enabling/Disabling Auto Power-OFF <Off Timer>
This function allows you to specify whether to turn on/off the monitor automatically after a specified time has
elapsed in the power saving mode.
Adjustable range
Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min, 1-5 h)
Procedure
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Off Timer> from the <Others> menu, and press
The <Off Timer> menu appears.
3. Select "Enable" or "Disable" with
If "Enable" is selected, set a monitor Off time with
4. Press
to exit the adjustment.
22
Chapter4PowerSavingFunctions
or
.
or
.
or
.
reduction as a result of the brightness of
2
.
.
emissions
2
/kWh)determined
2