Call Pickup; Campon - Mitel 5560 IPT User Manual

the park destination and parking spot index (if applicable). Example: PARKED@ 1234 @
02.
2. Dial the directory number on which to park the call (not required if the number is programmed
to the Call Park feature key).
3. To inform a user that a parked call is waiting, do one of the following:
•
If automatic paging is enabled, announce the call and the park retrieve digits shown on the
display.
•
If automatic paging is disabled, press the key you have programmed as Page, or dial the
appropriate feature access code, followed by the Paging zone number (if required). Then,
announce the call and the park retrieve digits shown on the display.
Note: Paging over a loudspeaker is not permitted in handsfree mode; you must use the handset
or headset.
To retrieve a parked call:
1. Do one of the following:
•
Press Left or Right to select the handset/headset you wish to use, then dial the
appropriate feature access code.
•
Press the key you have programmed as Call Park - Retrieve feature key
2. Dial the directory number on which the call is parked (not required if the number is
programmed to the Call Park feature key).
3. If there are multiple calls parked on the number, dial the two-digit index number to retrieve a
specific call, or # to retrieve the longest parked call.

Call Pickup

To answer a call that is ringing at another extension in your Pickup Group:
1. Press Left or Right to select the handset or headset you wish to use.
2. Press the key that you have programmed as Pickup.
To answer a call that is ringing at another extension not in your Pickup Group:
1. Press Left or Right to select the handset or headset you wish to use.
2. Dial the appropriate feature access code.
3. Dial the number of the ringing station.

Campon

When you get a busy tone, you can use the Campon feature to be notified when the busy party
becomes available.
To Campon to a busy station:
•
Press I Will Wait.
To retrieve a call when you hear the Campon tone:
•
Use the Trade Call or Call Swap feature with the Trans/Conf hardkey or a programmable
line key.
Mitel 5560 IPT User Guide
29