Call Pickup; Campon - Mitel MiVOICE 5304 User Manual

2. Dial the directory number on which to park the call (not required if the number is programmed
to a Call Park feature key).
3. To inform a user that a parked call is waiting, do one of the following:

If automatic paging is enabled, announce the call and the park retrieve digits shown on
the display.

If automatic paging is disabled, press the programmed Page key, or dial the appropriate
feature access code, followed by the Paging zone number (if required). Then, announce
the call and park retrieve digits shown on the display.
Note: Paging over a loudspeaker is not permitted in handsfree mode; you must use the
handset.
To retrieve a parked call:
1. Do one of the following:

Dial the appropriate feature access code.

Press the programmed Call Park - Retrieve feature key.
2. Dial the directory number on which the call is parked (not required if the number is
programmed to the programmed Call Park feature key).
3. If there are multiple calls parked on the number, dial the two-digit index number to retrieve a
specific call, or # to retrieve the longest parked call.

Call Pickup

To answer a call that is ringing at another phone in your Pickup Group:
1. Lift the handset.
2. Press the programmed Pickup feature key.
To answer a call that is ringing at a station not in your Pickup Group:
1. Lift the handset.
2. Dial the appropriate feature access code.
3. Dial the number of the ringing station.

Campon

To Campon to a busy station:

Press the programmed Wait feature key.
To retrieve a call when you hear Campon tone:

Press the programmed Trade feature key.
MiVoice 5304 IP Phone User Guide
17