Setting The Display Intensity - Mackie Digital 8 Bus Owner's Manual

D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
< -
P r e - P o s t D i s p l a y
D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
A U X 1 A U X 2
P r e P r e
SETUP
SAVE SAVE AS...
GROUP GENERAL
D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
( G E N E R A L
L a n g u a g e S u r r o u n d
( G E N E R A L S E T U P P G 2 )
A b o u t
A U X 3 A U X 4
P o s t P o s t
NEW LOAD
PLUG INS DIGITAL I/O
S E T U P P g 1 - > )
M I D I A u t o S a v e
3. Press the SELECT button below "Pre-
Post" in the Fat Channel Display. The
Pre-Post menu appears.
4. Press the NEXT button in the Fat
Channel Section to advance to AUX
5–8, and AUX 9-10–AUX 11/12. Press
the PREVIOUS button to move back
through the menu.
5. Press the SELECT button below each
Aux to toggle between Pre and Post.
6. When finished, press the GENERAL
button to return to normal Fat Channel
operation.
TO SET AUX SENDS PRE/POST FADER
From the screen:
1. Click on the Setup button in the lower
menu bar. The Setup dialog box opens.
2. Click on the Aux Sends icon on the left
side of the box. The Aux Sends dialog
box opens.
3. Click in the boxes corresponding to the
aux send you want to configure pre-
fader. A checkmark indicates pre-fader
is selected.
4. Click on the Close button in the upper
right corner of the dialog box to close
the Setup dialog box (or click on the
Setup button in the menu bar).

Setting the Display Intensity

This option allows you to adjust the
brightness of the Fat Channel Display.
TO SET THE DISPLAY INTENSITY
From the console:
1. Press the GENERAL button in the
Setup Section. The General Setup
Menu appears in the Fat Channel
Display.
2. Press the NEXT button in the Fat
Channel Section to scroll to the next
page of options.
3-9
Start-Up