Mackie Digital 8 Bus Owner's Manual page 45

T a p e
3-12
Start-Up
SETUP
SAVE SAVE AS...
GROUP GENERAL
D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
( D I G I T A L
1 - 8 T a p e 9 - 1 6 T a p e
D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
I n p u t O u t p u t
A D A T A D A T L o w
NEW LOAD
PLUG INS DIGITAL I/O
I / O S E T U P P g . 1 ) >
1 7 - 2 4 A L T 1 - 8
U V 2 2 ( D I G I T A L I O )
P o w e r E x i t
TO CONFIGURE DIGITAL I/O
From the console:
1. Press the DIGITAL I/O button in the
Setup Section. The Digital I/O Setup
Menu appears in the Fat Channel
Display.
2. Press the SELECT button below the
Tape I/O card, ALT I/O card, or Stereo
I/O you want to reconfigure (Stereo I/O
is selected on page 2 of the Digital I/O
Setup Menu).
3. Press the SELECT buttons below the
arrows in the display to scroll through
the available options.
4. When the option you want appears in
the display, press the SELECT button
below OK.
5. Press the DIGITAL I/O button to return
to normal Fat Channel operation.
TO CONFIGURE DIGITAL I/O
From the screen:
1. Click on the Setup button in the lower
menu bar. The Setup dialog box opens.
2. Click on the Digital icon on the left
side of the box. The Digital dialog box
opens.
3. Click and hold on the box for the
parameter you want to reconfigure.
Drag down to the desired selection
and then release to finalize your
selection.
4. Click on the Close button in the upper
right corner of the dialog box to close
the Setup dialog box (or click on the
Setup button in the menu bar).